3M Microfinishing Film Roll 373L, 30 Mic 5MIL, Type 2, Green, 0.669 in x 900 ft x 3 in (16.99mmx274.25m), Plastic Core, ASO, ERMB
3M Microfinishing Film Roll 373L, 30 Mic 5MIL, Type 2, Green, 0.669 in x 900 ft x 3 in (16.99mmx274.25m), Plastic Core, ASO, ERMB
3M Microfinishing Film Roll 373L, 30 Mic 5MIL, Type 2, Green, 0.669 in x 900 ft x 3 in (16.99mmx274.25m), Plastic Core, ASO, ERMB
Previous Next

3M Products & Supplies

3M Microfinishing Film Roll 373L, 30 Mic 5MIL, Type 2, Green, 0.669 in x 900 ft x 3 in (16.99mmx274.25m), Plastic Core, ASO, ERMB

Sold As: 18-Pack
SKU: 7100368667
MPN: 7100368667
Made to Order: For a lead time estimate, please send your request to orders@strobelssupply.com
UPC: 00638060553015
3M ID: UU013558935
$3,759.55 ($208.86 / Count)
Hurry up! Current stock:
Product Description  
3M Microfinishing Film Roll 373L quickly cuts, shapes and polishes, delivering uniform, close-tolerance finishes on parts used in metalworking applications.

Our 3M™ Microfinishing Film Roll 373L has a friction coating made with quartz mineral. This coating is anti-slip, so the abrasive won’t slip from machines or workpieces – like camshafts, crankshafts and transmission parts – during finishing. The polyester cloth backing is typically stronger than paper backings. It can be run wet on microfinishing machines and stays strong when applied to the oscillating part. Additionally, the abrasive mineral is uniformly distributed over the backing. The strength of the backing, combined with the uniformity of the mineral, helps produce a consistent finish each time you sand.

Microfinishing – an important application for many operators – corrects the geometry of parts and creates fine finishes. Microfinishing can remove damaged or amorphous layers to improve the surface finish and roundness of the part. Available in variety of grades, operators should consider target tolerances when selecting the right microfinishing film. We designed Microfinishing Film Roll 373L Type 2 film in a range of colors – reflective of each grade – for added value, helping reduce the risk for error.

To improve the geometry of parts and achieve desired finishes, our 3M™ Microfinishing Film Roll 373L is an exceptional choice.

Extra Details

  • 0.020 inch (0.51 mm) double coated foam tape has the air release feature with a plate side adhesive technology designed to remove with less force from flexographic print plates
  • Cushioned flexographic plate mounting sticky back foam tape
  • Flexographic printing, flexographic printers
  • Grooves in the adhesive are created by a cross-hatch pattern from the release liner
  • Has a standard medium density foam that is ideal for printing combinations of solids and process with halftone dots
  • Plate easily demounts from the double coated cushioned tape without adhesive residue
  • Print plates mounted on E1020 will have no air bubbles under the plate due to the air release feature designed into the tape
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
  • Tape also removes cleanly from the sleeve or steel print cylinder
  • White foam color indicates the standard, medium density foam

Customers Also Viewed