3M Thin Flexographic Mounting Tape 2205FL
3M Thin Flexographic Mounting Tape 2205FL
3M Thin Flexographic Mounting Tape 2205FL
Previous Next

3M Products & Supplies

3M Thin Flexographic Plate Mounting Tape 2205FL, Translucent, 27 in x 60 yd, 5 mil, 1 Roll/Case, 3 inch Core

SKU: 7010291524
MPN: 7010291524
Lead Time: 5 working days.
UPC: 00076308982911
3M ID: 70006776309
5 Digit UPC: 98291
Shelf Life: 365 Days
Country of Origin: USA
Manufacturer: 3M
Size: 27 in
Thickness: 5 mil
Color: Translucent
$944.61 each
Hurry up! Current stock:
Product Description  
3M Thin Flexographic Mounting Tape 2205FL Translucent is a 5 mil, double coated film tape with differential acrylic adhesives on a polyester film carrier with a polycoated polyester liner. This tape is specifically designed for the corrugated printing segment to hold flexographic print plates to PVC saddles/carriers.

Both adhesives for 3M™ Thin Flexographic Mounting Tape 2205FL Translucent are designed to provide high holding power and to cleanly remove from both the plate and the carrier. This product uses the 3M  easy mount liner, which creates micro-channels on the linered-side adhesive surface. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and the carrier.

Recommended Applications

  • Mounting flexographic corrugated post print plates to PVC saddles/carriers

On Easy with Reduced Air Entrapment
3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique micro-channels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting.

Keep the Presses Running and your Customers Coming Back
For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done. From paper web splicing to plate mounting and packaging the finished job, you can rely on 3M for solutions and service throughout an operation.

Extra Details

  • 0.005 inch (0.13 mm) double coated tape is designed for the corrugated printing business to hold flexographic print plates to PVC carriers/saddles
  • Clean plate removal when demounting or repositioning
  • Excellent holding power on-press with high plateside adhesion
  • Grooves in the adhesive are created by a cross-hatch pattern from the release liner
  • Linered side of the tape is designed for mounting to the carrier and has the air release feature allowing air to escape from between the tape and the carrier
  • Non-linered side of the tape is designed for mounting to photopolymer plates

Customers Also Viewed