Bondo Original Filler is your go-to solution for versatile interior or exterior same day repairs for home and auto projects. Unleash the power of this all-purpose, two-part filler compound to effortlessly fill dents, dings, and scratches with precision. Now available in convenient pre-measured packets, Bondo Original Filler offers a hassle-free application process, ensuring accurate proportions for optimal results. This fast-curing filler shapes in minutes and is specially formulated to be non-shrinking, providing a seamless finish for your repairs. Achieve high-quality, permanently durable results on various surfaces; including metal, aluminum, concrete, masonry, and more. Bondo Original Filler Ready Mix Pouch Directions: 1) Clean all surfaces with soap and water followed by a low VOC compliant cleaner. Allow to dry. 2) Sand the damaged area with 80 grit sandpaper to remove all paint, primer, and rust down to bare metal. Sand 1-2 inches beyond damaged area. Clean again with a low VOC compliant cleaner. 3) Separate the hardener and filler pouches by tearing down the perforation line. 4) Knead the filler pouch and hardener pouch to ensure components are ready for use. 5) Tear the filler pouch open and use the spreading tool to push the entire pouch contents onto a non-porous mixing surface. 6) Tear the hardener pouch open and use the spreading tool to push the entire pouch contents onto the non-porous mixing surface next to the filler. 7) Use spreading tool to mix hardener and filler components together to achieve a uniform color. When product is mixed, the working time is 3-4 minutes. 8) Spread an initial thin layer of the mixed filler over the repair area using firm pressure to ensure maximum adhesion. Apply additional layers of filler as needed. Allow filler to cure 20 minutes. 9) Rough shape the filler with 80 grit sandpaper. Finish sand with 180 grit and finer. Featheredge the repair. Wait 45 minutes and apply 2-3 coats of primer to cover the repair area. 10) Apply Bondo Glazing and Spot Putty to fill in small imperfections and re-prime with 2-3 coats. Follow paint manufacturer’s recommendation for priming and final finishing. For best results apply at 45°F (7°C) or above. Clean tools with acetone or lacquer thinner. Help line: 1-800-494-3552 0
US Dollars
